Feb 4

Birçok eklenti, 3rd parti yazılımlar kurulmuş bir exchange sunucunun bağlı olduğu domainde Administrator parolası değiştirdikten sonra eğer Event ID 529 ve 8213 düşüyorsa.

Öncelikle Administrator hesabı ile çalışan bir exchange servisi var mı kontrol ettikten sonra eğer yoksa aşağıdaki makaledeki işlemler sorunumuzu çözüyor.

Örnek Hata Logları

Event Type: Failure Audit
Event Source: Security
Event Category: Logon/Logoff
Event ID: 529
Date: 27.01.2011
Time: 16:30:05
User: NT AUTHORITY\SYSTEM
Computer: MAILSUNUCU
Description:
Logon Failure:
Reason: Unknown user name or bad password
User Name: Administrator
Domain: DOMAIN
Logon Type: 7
Logon Process: Advapi
Authentication Package: Negotiate
Workstation Name: MAILSUNUCU
Caller User Name: MAILSUNUCU$
Caller Domain: DOMAIN
Caller Logon ID: (0x0,0x3E7)
Caller Process ID: 3780 (mad.exe)
Transited Services: –
Source Network Address: –
Source Port: –

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

Birde Application log içerisine aşağıdaki log düşüyor?

Event Type: Error
Event Source: MSExchangeFBPublish
Event Category: General
Event ID: 8213
Date: 1/27/2011
Time: 4:20:05 PM
User: N/A
Computer: MAILSUNUCU
Description:
System Attendant Service failed to create session for virtual machine MAILSUNUCU. The error number is 0xc007052e.

Çözüm;
http://support.microsoft.com/kb/296151/en

1. Start Registry Editor.
2. Locate the Server value under the following key in the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeFBPublish\Parameters\
3. On the Edit menu, click Add Value.
4. In the Value Name field, type FreeBusyQuerySessions, set the Data Type to REG_DWORD, and then click OK.
5. In the Data field, type 00000000, and then click OK.
6. Quit Registry Editor.
7. Restart the Microsoft Exchange System Attendant.
8. Start Exchange System Manager, and then locate the storage group.
9. Click the private store, and then right-click Properties.
10. Click the Security tab, and then click the Exchange service account.
11. Click View information store, click Administer information store, and then set the permissions.
12. Reset the Administrative Group’s service account.

To reset the Administrative Group’s service account, follow these steps:

1. Back up the Exchange Server 2003 or Exchange 2000 Server information store and the Windows system state data of a domain controller.
2. Start the ADSI Edit tool.
3. Expand Configuration Container [domain name], expand CN=Configuration,DC=Domain_name, expand CN=Services, expand CN=MicrosoftExchange, expand CN=Organization_Name, and then expand CN=Administrative Groups
4. Right-click CN=Your Admin Group Name, and then click Properties.
5. Click the Attribute Editor tab.
6. Double-click the following properties, note the value if there is a value in the property, and then click the CLEAR button:
* msExchEncryptedPassword
* msExchLegacyAccount
* msExchLegacyDomain
7. Double-click msExchAdminGroupMode.
8. Type 2 for the value.

Note Before you change the value to 2, note the original value.
9. Click OK, click Apply, and then click OK.
10. Quit the ADSI Edit tool.
11. Restart the Microsoft Exchange System Attendant service and all dependent services.



Bu site en iyi internet explorer 7 ve firefox üzerinde görüntülenebilir. Sitemap Mustafa KULLUKÇU
Powered by Wordpress.org     Wordpress tema